CTMP/APMP Pulping

Corn Mill

 

Genda Precision Grinding has used its high-consistency refiner technology accumulated over 19 years to develop a special mill for corn milling, which is designed to destroy the combination between germ, fiber, starch, oil and protein, without making fibers cut too finely, resulting in a sharper separation between fiber and protein/starch/oil. Genda fine grinder grinds germ and kernels particles to a particle size of about 300-800 microns, while most fibers remain within the particle size range of 500-2000 microns. Achieve no greater than 50% by weight of the total particles having a particle size of 100 - 800 microns. In solid particles larger than 300 microns, protein is approximately 29.5%. After grinding, and if washing techniques are used, the protein in the fiber can be reduced from about 29.5% to about 21.1%. The oil in the fiber can be reduced from about 9.6% to 6.4%, and the starch in the fiber can be reduced from about 5.5% to 3%.

 

Main Equipment:1

 

1、The main components of the grinder are: grinding chamber, main shaft assembly, frame, advancing and retracting tool mechanism, etc.

2、The grinder is driven by a servo motor, the gear set is driven by the reducer, and the thrust is distributed to lifting screws on both sides to ensure stable thrust and precise clearance control.